KWH-180S+AZZP-180C boiler with burner is used to burn carbiopellet or pellet and produce hot water with temperature of 95°C. It can operate with open heating system with pressure of max. 3 bars. Fuel from the tank is fed into the burner with ceramic lining by means of a driven worm conveyor. Fuel gasification takes place in the burner located in the boiler's combustion chamber. Their burning goes on in there as well. Then the gases flow from the combustion chamber to exchanger. Combustion process control is automatic. The controller controls: fuel feeding, movable grate drive, cleaning burner from ashes, mechanism of cleaning combustion tubes in the boiler, drive of ash removal from the boiler; is able to light up the fuel. The boiler operates in natural draught or forced one, in case of using smoke cyclone with exhaust fan. The fuel tank with burner in basic version is installed at the boiler's front; however it can also be mounted at the boiler's side.

 

Rated thermal power

kW

180

Max. carbiopellet and pellet moisture

%

8

Required draught at the boiler's back

Pa

>29

Fuel consumption

kg/h

ca. 40

 

Admissible static pressure in installation

bar

3

Drive power

kW

0.95

Lighter power

W

2 x 350

Fans' power

W

450

Boiler water capacity

I

800

Ask about this product

Full name / Company*
E-mail
Phone
Preferred way of the contact
Phone E-mail Fax
Additional information (type, size, power and the like)
* - compulsory field

News

LIGNA - World fair for the forestry and wood industry‎

11-15.V.2015, Hannover, hall 13, E46

Thank you for visiting our booth.

visit LIGNA page...


Agro international fairs Show

19-22. IX.2014, Bednary (Poznań), open area, C sector, stall 619
 
16-19. IX.2014, Poznań, pavilion 5 sector A
 
We are inviting cordially for visiting our stall